Choose the Latest Technology in Water Softeners by Expert Water
An Expert Water Softener is equipped with the newest components on the market at this time.
Control valve - the most important component of the system produced by Clack USA
- has the simplest design and is the easiest to use, compared to other valves that are on the market. It has only one component in motion - the piston is produced from the same material as the bullet-proof glass - so the maintenace will be after very long periodTechnical characteristics of USA CLACK valves:
• Solid state microprocessor with easy access front panel settings • Three modes of operation; meter immediate, meter delayed, or time clock delayed • Double backwash feature offers optimum regeneration, cleaning ability, and efficiency • Days override feature; 1 – 28 days available • Backwash and brining ability to 21” diameter tanks • Downflow/upflow regeneration • Stores system configuration and operation data in nonvolatile memory • Control valve design provides optimum service and backwash rates • Pre or Post treated water regenerant refillWater softeners - Cabinets
The main advantages of this model are:
- Up flow regeneration with saline solution - the most efficient method
- Volumetric regeneration at the time set by the user
- Microprocessor with non-volatile memory
- Display water volume per day and total also flow rate
- The operating parameters controlled by the microprocessor
- The possibility of introducing the effective value of the water hardness
- Savings of up to 70% in the paste salt compared to other softening systems
For more details, please contact our Sales Department:
Water softener EWS10 -EWS15
This model is for small families of 1 - 3 persons with a water hardness of location of maximum 25 German degrees ( 445 ppm - 4.45 mmol/l CaCo3) . Also the locations in which they are installed are those that have a number of bathrooms and kitchens between 1 or 2 maximum.
Water softner EWS 18 - EWS 20
The models with 18 or 20 liters of cationic resin has a medium capacity for medium hardness - max 35 German degrees ( 623 ppm - 6,23 mmol/l CaCo3) and are suitable for families with 2 - 4 people and houses with several bathrooms and kitchens - max 2-4.
Water softeners EWS 25 and EWS 28
This is the most common model of domestic softeners because they have a big flow rate and salt storage capacity, which leads to the poorer supply of the salt vessel. It is suitable for large families with more than 5 persons or high hardnesses, over 35 German degrees ( 623 ppm - 6,23 mmol/l CaCo3), even if the number of persons in the family is smaller. The flow (the possibility to feed a location with more bathrooms and kitchens) is high - up to 2 - 2.3mc / h which means 5 bathrooms + kitchens.
Simplex Water Softeners ( Domestic and Industrial application)
The models of Simplex Water Softeners include a fiber vessel with resin that is separated by a brine vessel.
The Simplex Water softeners are equipped with a CLACK valve or EXPERT valve.
Twin Alternating Water Softeners ( Domestic and Industrial application)
Twin alternating Water Softeners are composed by 2 fiber vessels with cationic resin and have the possibility to supply water 24/24 compare with a single resin vessel. They are used in industrial applications where it is necessary to supply softened water without interruptions. Expert Water Twin Alternating Softeners are especially built to treat water from locations with large numbers of people, such as block of flats, hotels, boarding houses, or any kind of community. Also, these systems are ideal for industrial applications, where you need a CONTINUOUS OPERATION 24/24. Expert Water Systems are able to operate at high flow rates and with low pressure losses. They have a controller that allows programming the operating parameters in detail.
For more details, please contact our Sales Department:
Water Softeners – Multiplex Systems – from 2 to 6 tanks/systems.
Dedurizatoarele MULTIPLEX
The Multiplex system is composed by several simplex units that are intelligently coordinated by a central controller.
The advantage is that you can create systems that will take less space in height and which are easy to handle, installed and an easy maintenance.
They work according to several programs that can be set and changed according to the user's preferences.
Maximum flow: At the same time, one or more units can be in stand-by (more if the system is larger than a duplex). The system offers the possibility of introducing a maximum flow in the controller, and when this flow is reached, one or more of the units in stand-by will start operating. By the same mechanism, when there is a decrease in the flow of consumed water, one or more units are automatically cleaned and then put on stand-by. The cycle will be reloaded when a new peak of the flow is reached.
Alternative: The systems work alternately because they are rotated by software depending on water consumption. One unit is in stand-by until another unit that supplies softened water is charged with limestone. At this moment the unit that was in stand-by is put into operation and the one filled with limestone is passed in the regeneration procedure. When its regeneration is completed, the unit is put into stand-by, as a reserve until another unit is exhausted and the regenerated one will take its place in the system.
